Oxidative stress in the freshwater cyprinid crucian carp (Carassius carassius L.) upon chronic exposure to endosulfan

Oxidative stress and antioxidant responses of crucian carp, upon chronic exposure to endosulfan, were evaluated in vivo. The lethal concentration (LC_50–96?h) was 70 μg L^?1; on its basis, the fish were exposed to endosulfan at 20, 35, and 50 μg L^?1 and autopsy was done on days 1, 2, 3, 4, 7, 14, 21, 28, and 35. Lipid peroxidation was induced in a concentration-dependent manner, being highest at 50 μg L^?1 (3/4 LC_{50–96 h}, sub-lethal concentration-I, SL-I) on day 4 (720% versus control), followed in its extent (490%) at 30 μg L^?1 (1/2 LC_{50–96 h}, sub-lethal concentration-II, SL-II) on day 7 and lowest (260%) at 10 μg L^?1 (1/4 LC_{50–96 h}, sub-lethal concentration-III, SL-III) on day 14. Glutathione showed a concentration- and time-dependent elevation in the initial phase, with highest level on day 4 (180%) at SL-I, but showed significant reduction in all test concentrations from day 21 of post-exposure. Superoxide dismutase was decreased significantly throughout the study, with highest reduction (63%) on day 4 at SL-I; catalase increased in all test concentrations up to day 14 but showed a significant decrease from the day 28 of post-exposure. The potential role of these parameters as indicators of pesticide pollution in aquatic systems is discussed.     

Removal of Remazol Brilliant Violet-5R dye using periwinkle shells

The purpose of this research is to obtain optimal processing conditions for the adsorption of Remazol Brilliant Violet-5R (RBV-5R) dye onto activated carbon prepared from periwinkle shells (PSAC) by chemical activation with KOH using response surface methodology. Central composite design (CCD) was used to determine the effects of three preparation variables; CO₂ activation temperature, CO₂ activation time and KOH:char impregnation ratio (IR) on two responses; percentage RBV-5R dye removal and PSAC yield. Based on the CCD, two quadratic models were developed for percentage RBV-5R dye removal and PSAC yield, respectively. The most influential factor on each experimental design response was identified from the analysis of variance (ANOVA). The optimum conditions for the adsorption of RBV-5R dye onto PSAC were CO₂ activation temperature of 811 °C, CO₂ activation time of 1.70 h and IR of 3.0, resulting in 81.28% RBV-5R dye removal and 28.18% PSAC yield. PSAC prepared under optimum conditions was mesoporous with a Brunauer–Emmett–Teller surface area of 1894 m²·g^?1, total pore volume of 1.107 cm³·g^?1 and average pore diameter of 2.32 nm. The surface morphology and functional groups of the activated carbon were respectively determined from the scanning electron microscopy and Fourier transform infrared analysis.     

Determination of aflatoxin-B1 in poultry feed and its components employing enzyme-linked immunosorbent assay (ELISA)

A highly sensitive enzyme immunoassay was standardized for aflatoxin B₁ determination in poultry feed and its components using Riedel-de-Haen, ELISA Systems_. A microtitration plate method was optimized using anti-aflatoxin B₁ antibodies and peroxidase – aflatoxin B₁ conjugate, based on competitive enzyme immunoassay principle. Standards of concentrations of 5, 10, 20, 50, 100, 500?ng/L aflatoxin B₁, prepared in phosphate-buffered saline, were used. Standard curves showed that as the concentration of antigen decreased, absorbance values increased. Fifty percent inhibition was observed at 37?ng/L. Regression analysis showed that log concentration was inversely related to %B/B₀, with a highly significant negative correlation (?0.980). The lowest detection limit for aflatoxin B₁ was 5?ng/L. Using this standardized ELISA, aflatoxin B₁ was detected in most of the commercially available poultry feed samples and their components.

The data suggest that this test is suitable for the accurate determination of aflatoxin B₁ concentrations in poultry feed and its components.     

Nanoscience in food and agriculture: research,industries and patents

High population rise and climate changes are increasing issues of agricultural production and food safety. Nanotechnology is finding revolutionary applications to improve agricultural and food systems, notably for better crop production and food preservation. Here we review research, industrial and patent trends of nanoscience in food and agriculture. In a literature survey, we found 44.6% publications in the nano-food research area during the years 2013–2015 and 59.09% publications in the nano-agriculture research area during 2012–2015. USA is leading in the development of nanotechnology firms with a maximum share of 75.5% of the total firms, followed by Germany and France with 8.10 and 4.74%, respectively. USA is leading in the nano-food research with 22 granted patents, whereas China is placed first in nano-agriculture research with 28 granted patents during assessment years 2011–2015. Nano-food research focused mainly on nano-food packaging with 76.84% contributions, whereas in nano-agriculture research, focus has been on nano-fertilizers with 90% contributions. Germany, France, Korea, Italy, Czech Republic, Slovenia and Slovak republic have more than 20% of dedicated nanotechnology firms. A growth of about 45% in nano-food patents has been observed for USA during 2011–2015, and China is leading in the nano-agriculture patents with an increase of 60.7% during 2012–2015.     

Validation of plant based bioassays for the toxicity testing of Indian waters

Plant-based bioassays have recently gained remarkable popularity among the toxicological/eco-toxicological assessment procedures. The reasons for their wide use are comparative simplicity, sensitivity, and cost-effectiveness as well as a good correlation with other toxicity tests. The present study describes the use of two plant bioassays, Allium cepa test and seed germination test in the evaluation of the toxicity/genotoxicity of industrial waste water and river water and standardization with the commonly occurring pollutants in Indian waters namely heavy metals and phenolics. Both tests were standardized to suit the Indian conditions, and the local varieties were used. Both bioassays responded significantly with the test range of heavy metals and phenolics. The toxicity of heavy metals was in the order of Cu > Ni > Cd in both the tests whereas 2,4-dinitrophenol was the most toxic among the phenolic compounds. Cabbage, millet, and cucumber, respectively, were found to be the most sensitive in the seed germination test for the test heavy metals and phenols. Significant amounts of chromosomal abnormalities including bridges, stickiness, and fragmentations were recorded with both the industrial waste water and the XAD concentrated river water samples by A. cepa test.     

Effect of calcium against salinity-induced inhibition in growth, ion accumulation and proline contents in Cichorium intybus L

This study assesses the effect of NaCl (80 and 160 mM) and CaCl2 (10 mM) solutions, alone and in combination, to 30-day-old seedlings of Cichorium intybus L. Observations were made at 30 day intervals from the time of treatment till harvest (180 days after sowing). Application of NaCI resulted in significant decreases in lengths of root and stem, in dry weights of root, stem and leaves and in the leaf area, as compared with control. The reduction was less with the combined application of NaCI and CaCI2 than with the NaCI treatment alone. On the contrary treatment of CaCl2, alone promoted the above variables. Proline content in the leaves was enhanced with NaCl and CaCI, alone as well as with the NaCI + CaCI2 treatments; the maximum (six-fold) enhancement was observed with the combined treatments, compared with NaCl (four-fold increase) and CaCl2 (two-fold increase) alone. The sodium (Na+) and Chloride (CI) contents in different plant parts increased both with NaCI and with NaCI+ CaCI2 treatments. The maximum accumulation was observed in leaves, followed by that in stem and root. The potassium (K+) and calcium (Ca2+) contents decreased under NaCl stress, but increased with CaCI2 treatment. Thus, calcium ameliorated the deleterious effects of NaCI stress and stimulated the plant metabolism and growth.     

Using Paleo Reconstructions to Improve Streamflow Forecast Lead Time in the Western United States

In water stressed regions, water managers are exploring new horizons that would help in long‐range streamflow forecasts. Oceanic‐atmospheric oscillations have been shown to influence streamflow variability. In this study, long‐lead time streamflow forecasts are made using a multiclass kernel‐based data‐driven support vector machine (SVM) model. The extended streamflow records based on tree ring reconstructions were used to provide a longer time series data. Reconstructed data were used from 1658 to 1952 and the instrumental record was used from 1953 to 2007. Reconstructions for oceanic‐atmospheric oscillations included the El Niño‐Southern Oscillation, Pacific Decadal Oscillation, Atlantic Multidecadal Oscillation, and North Atlantic Oscillation. Streamflow forecasts using all four oscillations were made with one‐year to five‐year lead times for 21 gages in the western United States. This is the first study that uses both instrumental and reconstructed data of oscillations in SVM model to improve streamflow forecast lead time. SVM model was able to provide “satisfactory” to “very good” forecasts with one‐ to five‐year lead time for the selected gages. The use of all the oscillation indices helped in achieving better predictability compared to using individual oscillations. The SVM modeling results are better when compared with multiple linear regression model forecasts. The findings are statistical in nature and are expected to be useful for long‐term water resources planning and management.     

Evaluating Water Conservation and Reuse Policies Using a Dynamic Water Balance Model

A dynamic water balance model is created to examine the effects of different water conservation policies and recycled water use on water demand and supply in a region faced with water shortages and significant population growth, the Las Vegas Valley (LVV). The model, developed using system dynamics approach, includes an unusual component of the water system, return flow credits, where credits are accrued for returning treated wastewater to the water supply source. In LVV, Lake Mead serves as, both the drinking water source and the receiving body for treated wastewater. LVV has a consumptive use allocation from Lake Mead but return flow credits allow the water agency to pull out additional water equal to the amount returned as treated wastewater. This backdrop results in a scenario in which conservation may cause a decline in the available water supply. Current water use in LVV is 945 lpcd (250 gpcd), which the water agency aims to reduce to 752 lpcd (199 gpcd) by 2035, mainly through water conservation. Different conservation policies focused on indoor and outdoor water use, along with different population growth scenarios, are modeled for their effects on the water demand and supply. Major contribution of this study is in highlighting the importance of outdoor water conservation and the effectiveness of reducing population growth rate in addressing the future water shortages. The water agency target to decrease consumption, if met completely through outdoor conservation, coupled with lower population growth rate, can potentially satisfy the Valley’s water demands through 2035.